Kicker Car Speaker RMB6 User Manual

RMB6 / RMB8  
Congratulations! You have just purchased one of the latest in a  
long line of exceptional car audio products from Stillwater Designs.  
Your KICKER Midbass drivers were designed and engineered by the  
same team which created many other international award winning  
KICKER products like the Solo-Baric, Comp VR and Resolution driv-  
ers. It contains a number of cutting-edge features to give you out-  
standing performance and dependability. Thanks for buying KICKER.  
Enjoy.  
Features  
NEW FOR 2002!  
•Ultra Slim Midbass Drivers Gives you real low frequency output from factory loca-  
tions.  
•CIMP (Curvilinear Injection-Molded Polygraphite) Woofer Cones For smooth  
extended frequency response.  
•Santoprene Surround Tough, flexible surround with long throw, to control extreme  
cone excursions.  
Blackened Motor Structure and Kapton™ Voice Coil Formers For exceptional  
thermal power handling capability.  
•SSD (Spun Spoke Design) Enhances the cosmetics and provides a solid anti-resonant  
foundation for the motor assembly.  
•Spring Loaded Nickel Plated Terminals For solid connections with large gauge  
speaker wire.  
Specifications  
MODEL  
RMB 6  
RMB 8  
Frequency  
Response  
Power  
Cut Out  
Mounting Depth  
Sensitivity  
Peak / RMS  
(in. / cm)  
(in. / cm)  
(1 W / 1 M)  
30-500  
30-500  
250 / 125  
350 / 175  
5 5/8 / 14.29  
7 1/4 / 18.42  
2 / 5.08  
88  
89  
2 1/4 / 5.8  
Available in 4 ohm models only.  
 
Wiring  
Your Midbass driver has two spring loaded terminals. The red terminal is con-  
nected to the positive wire and the black terminal is connected to the negative  
wire from the source unit or amplifier. Since your midbass drivers have a limited  
frequency range it is recommended to use a bandpass crossover. Use either a  
passive unit to connect into an existing system or for higher performance, an  
electronic crossover and a dedicated amplifier.  
Kicker recommends using the RMB series midbass drivers in conjunction with  
the Resolution Series or Kicker Series Components. This will create a seamless  
sound stage.  
Other  
Channel  
Tweeter  
+
_
_
_
SOURCE UNIT  
+
+
&URVVYRHU  
6 dB / Octave  
Midrange  
CAPACITOR  
COIL  
+
+
_
+
400 µf  
To Amplifier  
_
To  
Speaker  
1.6 mH  
_
RMB Midbass  
12 dB / Octave  
CAPACITOR  
COIL  
+
+
_
+
70 µf  
9 mH  
To Amplifier  
To  
Speaker  
281 µf  
2.2 mH  
_
_
(OPTIONAL PASSIVE CROSSOVER COMPONENTS)  
If you have more questions about the installation of your KICKER component,  
see the Authorized KICKER Dealer where you made your purchase. You may con-  
Services Line at (405)624-8583  
3
 
SPEAKER SYSTEMS LIMITED WARRANTY  
Stillwater Designs warrants this product to be free from defects in material and workmanship under  
normal use for a period of one (1) year from date of original purchase from an Authorized  
Kicker Dealer, unless this product is labeled “B Stock”, in which case it is warranted for ninety (90)  
days from date of purchase. Should service be necessary under this warranty for any reason due to  
manufacturing defect or malfunction during the warranty period, Stillwater Designs will replace or  
repair (at its discretion) the defective merchandise with equivalent merchandise at no charge. Warranty  
replacements on “B-Stock” may have cosmetic scratches and blemishes. Discontinued products may be  
replaced with equivalent products.  
This warranty is valid only for the original purchaser and is not extended to owners of the prod-  
uct subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a  
period of the express warranty as provided herein beginning with the date of the original purchase at  
retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states  
do not allow limitations on implied warranties, therefore these exclusions may not apply to you.  
This warranty gives you specific legal rights; however you may have other rights that vary from state  
to state.  
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE  
Defective merchandise must be returned to your local Authorized Stillwater Designs (Kicker) Dealer for  
warranty. Assistance in locating an Authorized Dealer can be obtained by writing or calling Stillwater  
Designs direct. You can confirm that a dealer is authorized by asking to see a current authorized dealer  
window decal.  
If it becomes necessary for you to return defective merchandise, call the Kicker Customer Service  
Department at (405)624-8510 for a Return Authorization (RA) number. Package all defective items in the  
original container or in a package that will prevent shipping damage, and return to  
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075  
The RA number must be clearly marked on the outside of the package. Return only defective compo-  
nents. Return of entire cabinets, system packs, pairs, etc. increases your return freight charges. Non-  
defective items received will be returned freight collect.  
Include a dated proof-of-purchase from an Authorized Dealer. Warranty expiration on items  
returned without proof-of-purchase will be determined from the manufacturing date code. Coverage  
may be invalidated if this date is greater than 18 months previous to the date item is sent in. Freight  
must be prepaid; items received freight collect will be refused.  
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker  
Customer Service Department at (405)624-8510.  
WHAT IS NOT COVERED?  
This warranty is valid only if the product is used for the purpose for which it was designed.  
It does not cover:  
Install slips (screwdriver holes)  
Damage caused by exposure to water  
and/or excessive heat.  
Damage through negligence, misuse, or  
accident.  
Items physically damaged due to abuse.  
Freight damage.  
The cost of shipping product to Stillwater  
Designs Service.  
Items previously repaired by any  
unauthorized repair facility.  
Items returned from unauthorized  
individuals or dealers.  
Return shipping on non-defective items.  
Speakers damaged due to amplifier  
clipping or distortion.  
Speakers with silicon caulk used for gasket  
material.  
HOW LONG WILL IT TAKE?  
Stillwater Designs maintains a goal of 24-hour service for all returns. Delays may be  
incurred if lack of replacement inventory or parts is encountered.  
INTERNATIONAL WARRANTY  
Contact your International Stillwater Designs dealer or distributor concerning specific  
procedures for your country’s warranty policies.  
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510  
KICKER drivers are capable of producing sound levels that can permanently  
damage your hearing! Turning up a system to a level that has audible distor-  
tion is more damaging to your ears than listening to an undistorted system at  
the same volume level. The threshold of pain is always an indicator that the  
sound level is too loud and may permanently damage your hearing.  
WARNING:  
Please use common sense when controlling volume!  
January 2002  
 

Indesit Clothes Dryer TCD980 User Manual
Indesit Cooktop KP 9507 EB User Manual
Jensen Car Video System UV8020 User Manual
JVC Car Stereo System GET0074 001A User Manual
JVC Flat Panel Television PD 42X795 User Manual
Karcher Pressure Washer G 2800 OH User Manual
Karcher Pressure Washer K 226M User Manual
Kenwood Car Stereo System KAC8101D User Manual
Korg DJ Equipment PX5D User Manual
Korg Musical Instrument K25 User Manual