A
B
C
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A
Carefully place your TV face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
QUICK
B
C
Attach the stand column to the TV using the four of the provided M4 screws.
Attach the stand to the stand column using the four of the provided M4 screws.
M4 screws (12 mm)
M4 screws (12 mm)
SETUP GUIDE
24" LED TV
NS-24E40SNA14
- OR -
How do I prepare my TV for wall mounting? (not for use with a TV stand)
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
You’ll need: A soft surface to lay the TV on.
A
B
Carefully place your TV face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
Attach the wall-mount bracket to your TV using the mounting holes on the
back of your TV. See the instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) and/or connect a device such as
a DVD or Blu-ray Disc player, game station, or camcorder?
Which cables do you have?
Your TV has several different jacks for connecting devices. For the
STOP!
best video quality, use the best available connection. Use the cables
that came with your devices.
Do not plug your
power adapter in until
all other devices have
been connected.
Using an HDMI cable (BEST)
VIDEO QUALITY
JACK TYPE
CABLE CONNECTOR
Multi-purpose jacks: You can plug
any device that uses HDMI into
either of the HDMI jacks. However,
certain devices must be connected to
HDMI1/DVI or HDMI2/ARC. See the
instructions that came with your ARC
or DVI device for more information.
HDMI video/audio
BEST
BETTER
GOOD
GOOD
Component video and analog audio
Included accessories
Composite video and analog audio
Coaxial video/audio
Using component cables (BETTER)
Note: You can use the HDMI 1/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about different types of
HDMI (ARC, DVI).
Component cable option
Remote control
and two AAA batteries
- OR -
AUDIO/VIDEO OUT
(GOOD)
Using an AV cable
Features
Front view
NS-RC6NA-14
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
AUDIO/VIDEO
OUT
Power indicator
Note: Connect the yellow video
cable to the green Y/VIDEO jack on
the back of your TV.
Remote control sensor
Power adapter
Stand column
AV cable option
Back view
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest using
HDMI if your device supports it.
TV stand
How do I connect my TV to an antenna or cable wall jack?
Power connector
CABLE
PC
AUDIO IN
/
DVI
VGA
DC 12V
L
AUDIO
R
VIDEO / Y
PB
PR
ANT / CABLE IN
M4 screws
POWER IN
AV / COMPONENT IN
PC IN
PC / DVI
AUDIO IN
VGA
DC 12V
L
AUDIO
R
VIDEO / Y
PB
PR
ANT / CABLE IN
(12 mm length) (8 pcs.)
POWER IN
AV / COMPONENT IN
PC IN
Note: Images do not necessarily represent the exact design of your television.
OVER
Before using your new product, please read these instructions to prevent any damage.
|